قرار گرفتن کانکتور برای اتصال اند استاپ از طریق پین‌های Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
استفاده از چهار لایه PCB برای بهینه‌سازی دمای برد هنگام استفاده
استفاده از  چیپ FT232RL در درایور USB
تعبیه فیوز حفاظتی در هنگام اتصال کوتاه
جریان درایور استپر موتور: 2A max
جریان فن: 10A max
جریان هیت بد:

MKS BASE is a feature rich all-in-one electronics solution for Reprap and other CNC devices. It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers. The board can use the same firmware as Ramps1.4. MKS BASE is designed to be flexible in the user's power source availability, allowing any power supply from 12V-24V.
MKS BASE is suitable for 3D printer manufacturers on batch production, and being used as main control board. Relative to the Ramps1.4, it adds E1 heating output.
 MKS BASE  is  suitable for dual-Extruder machine.
Features­
1.Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
2.Firmware can use the same configuration as ramps1.4
3.Easy DISPLAY + SD-CARD connector,RepRapDiscount SmartController compatible pin header on board
4.Easy connect MKS TFT on AUX-1
5.3x temperature ADC connectors for thermistors
6.up to 5 motor driver with A4982
7.4x PWM capable power mosfet outputs with voltage selector for MainPower.(Bed,Extruder0,Extruder1, Fans)
8.4 layers PCB, optimize heat dissipation.
9.6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
10.Recoverable fuse for short-circuit protection.
Please visit our github to download firmware:
github.com/makerbase-mks/
Packing Included:
1 * MKS BASE V1.6
1 * USB